The BerryClip 6 LED Board is a small, cheap and fun add-on board for the Raspberry Pi. It consists of a PCB populated with 6 coloured LEDs, 1 switch and 1 buzzer. It is easy to attach to the Pi’s GPIO header and allows anyone to quickly start creating fun scripts.
The simple combination of lights, switch and buzzer is a perfect introduction to software and hardware interfacing. There are plenty of example Python scripts available so once assembled you can get your board working in minutes.
Features & Benefits
- 6 coloured LEDs
- 1 switch
- 1 buzzer
- Example Python scripts
- No cables required
- Easy assembly
- Low cost
The board is sold as a kit of parts which must be soldered together.
Kit Contents
- 1 PCB
- 1 26-way header
- 2 Red LEDs
- 2 Yellow LEDs
- 2 Green LEDs
- 1 Buzzer
- 1 Switch
- 8 Resistors
Photos
Here is a collection of photos showing the BerryClip 6 LED Board on its own and also attached to a Raspberry Pi.
A guide to soldering the BerryClip 6 LED Board and instructions for installing some example Python scripts can be found on the BerryClip 6 LED Add-on Board Instructions page.
Buy A BerryClip 6 LED Board
Kits are usually available from the following sources :
