Raspberry GPIO Xmas Tree Add-on
Andrew Gale from PocketMoneyTronics.co.uk kindly sent me a GPIO Xmas Tree kit. Today I soldered…
Browsing: Hardware
Lumsing “Harmonica” 10400mAh Power Bank Test
I recently got sent one of Lumsing’s latest USB power banks. As it coincided with…
My Portable Raspberry Pi HDMIPi Build – Part 2
In my previous “My Portable Raspberry Pi HDMIPi Build – Part 1” article I presented…
My Portable Raspberry Pi HDMIPi Build – Part 1
The HDMIPi is a 9 inch screen and enclosure specifically designed for the Raspberry Pi.…
RAVPower RP-PB13 14000mAh Li-on Battery Power Bank Test
The new RAVPower RP-PB13 is the second RAVPower battery in my collection and at 14000mAh it is also…
Raspberry Pi Model A+ Cases
It’s early days at the moment but within the first week of the Model A+ release…
How To Create A Raspberry Pi Video Capture Unit – Part 3
In Part 1 and Part 2 of this set of articles I explained how I…
How To Create A Raspberry Pi Video Capture Unit – Part 2
Following on from Part 1 I’ll explain how you can install the Python software and get your…
How To Create A Raspberry Pi Video Capture Unit – Part 1
One hundred and fifty posts later I decided I should really complete a project I’ve been…
New Raspberry Pi Model A+ Revealed
Looks like the new Raspberry Pi Model A+ is ready to be released by the…
Enable I2C Interface on the Raspberry Pi
I2C is a multi-device bus used to connect low-speed peripherals to computers and embedded systems. The…
ProtoCam – A Camera Module Prototyping Board For The Pi
Richard from AveragemanVsRaspberryPi has kindly sent me a preview version of his new camera module…
32×32 RGB LED Matrix On The Raspberry Pi
At the last Cambridge Jam I picked up a 32×32 LED matrix panel from SK…
Farnell PiFace Control & Display Raspberry Pi Add-on Board
The PiFace Control and Display (PiFace CAD) addon for the Raspberry Pi is a great…
Enable SPI Interface on the Raspberry Pi
The Raspberry Pi has an SPI (Serial Peripheral Interface) bus which can be enabled on…
Raspberry Pi USB Power Bank Mega Test August 2014
Recently I was sent a new USB Power Bank by Lumsing. Rather than test it…
Eben Upton – Introducing the Raspberry Pi B+ Free Webinar
The Element14 Community are hosting a free webinar where Eben Upton, the inventor of the Raspberry…
Raspberry Pi 4-pole Audio/Video Jack
The Pi Model B+, Pi 2, Pi 3 and Pi 4 features a 4-pole 3.5mm…